Laying tacker panels

Tools required	Before laying, acclimatise the material by storing in the room it is to be laid in for 48 h at 15-30 °C and 40-70 % relative humidity	Create laying plan > optimise off-cuts	Substructure/ attach lathing	Lathing in domestic rooms Cross-lathing in wet rooms
Ensure back ventilation!	Transverse joints must have lathing at the back.	1. Align the panel and fix with nails or initial clips.	Fix panels with special claw CL 3.6 K or ...	... with tacker staples
Install further panels...	Optionally with zero joint (A) or cm joint (B).		Mark on the last panel...	... and cut to size
Fit in.	Fix cover strips/edge mouldings